ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming Pierre Baudis Convention Center, 11 Esplanade Compans Caffarelli 31000 Toulouse Toulouse, France, April 24-26, 2024 |
Conference website | https://esaform24.fr/ |
Submission link | https://easychair.org/conferences/?conf=esaform2024 |
Poster | download |
Abstract registration deadline | October 18, 2023 |
Submission deadline | January 5, 2024 |
Video - Toulouse | https://www.youtube.com/watch?v=_gqOQoREReA |
ESAFORM is an association ESAFORM is an association engaged to encourage applied and fundamental research in the field of material forming in all manufacturing processes.
Its annual conference, the International ESAFORM Conference on Material Forming, is created to achieve one of the main goals of ESAFORM: to spread scientific and technological information related to material forming within academia and industry.
The 27th International ESAFORM Conference on Material Forming (ESAFORM 2024) will be hosted by the Clément Ader Institute (ICA, CNRS UMR 5312) and ENIT (ENI Tarbes - LGP Production Engineering Laboratory). It will be held in Toulouse (France), at the Pierre Baudis Concention Center between 24-26th April, 2024.
Submission Guidelines
All papers must be original and not simultaneously submitted to another journal or conference.
One-page abstracts are requested with paper submissions required following abstract acceptance.
Important dates
- September 30, 2023 - Abstract Deadline
- March 1, 2024 - Deadline for Early Registration
- April 1, 2024 - Preliminary Program
- April 24-26, 2024 - ESAFORM-27
Mini-symposia
- MS01: ADDITIVE MANUFACTURING
- MS02: COMPOSITES FORMING PROCESSES *
- MS03: EXTRUSION AND DRAWING
- MS04: FORGING AND ROLLING
- MS05: FORMABILITY OF METALLIC MATERIALS: A MS IN HONOR OF PROF. BANABIC, PROF. BARLAT AND PROF KUWABARA
- MS06: FRICTION AND WEAR IN METAL FORMING
- MS07: INCREMENTAL AND SHEET METAL FORMING
- MS08: INNOVATIVE JOINING BY FORMING TECHNOLOGIES
- MS09: LIONEL FOURMENT MS ON OPTIMIZATION AND INVERSE ANALYSIS IN FORMING
- MS10: MACHINING, CUTTING AND SEVERE PLASTIC DEFORMATION PROCESSES
- MS11: MATERIAL BEHAVIOUR MODELLING
- MS12: NEW AND ADVANCED NUMERICAL STRATEGIES FOR MATERIAL FORMING
- MS13: NON-CONVENTIONAL PROCESSES *
- MS14: POLYMER PROCESSING AND THERMOMECHANICAL PROPERTIES
- MS15: SUSTAINABILITY ON MATERIAL FORMING
Committees
International Scientific committee
-
Prof. Akinori Yamanaka, Tokyo University of Agriculture and Technology, Japan
-
Prof. Alexander Brosius, Technische Universität Dresden, Germany
-
Prof. Anne Habraken, University of Liège, Belgium
-
Dr. Anne Mertens, University of Liège, Belgium
-
Prof. Antonello Astarita, University of Naples Federico II, Italy
-
Prof. António Gil Andrade-Campos, University of Aveiro, Portugal
-
Prof. Barbara Reggiani, University of Modena and Reggio Emilia, Italy
-
Prof. Beatriz Silva, University of Lisbon, Portugal
-
Prof. Benjamin Klusemann, Leuphana Universität Lüneburg, Germany
-
Prof. Bernd-Arno Behrens, University of Hannover, Germany
-
Prof. Carpoforo Vallellano, Universidad de Sevilla, Spain
-
Prof. Celal Soyarslan, University of Twente, Netherlands
-
Dr. Cédric Courbon, École nationale d’ingénieurs de Saint-Étienne, France
-
Prof. Celal Soyarslan, University of Twente, Netherlands
-
Dr. Chris Valentin Nielsen, Technical University of Denmark, Denmark
-
Dr. Christian Garnier, ENIT de Tarbes, France
-
Dr. Daniel Cooper, University of Michigan, USA
-
Dr. Denise Bellisario, University of Rome Tor Vergata, Italy
-
Prof. Dermot Brabazon, Dublin City University, Ireland
-
Dr. Dmitry Ivanov, University of Bristol, UK
-
Dr. Domenico Umbrello, University of Calabria, Italy
-
Prof. Fabienne Delaunois, Université de Mons, Belgium
-
Prof. France Chabert, ENI Tarbes - LMP/INP Toulouse
-
Dr. Francois Ducobu, Université de Mons, Belgium
-
Prof. Gary Menary, Queen's University Belfast, UK
-
Dr. Gabriela Vincze, University of Aveiro, Portugal
-
Prof. Gianluca Buffa, University of Palermo, Italy
-
Prof. Giovanna Rotella, University of Salento, Italy
-
Prof. Giusy Ambrogio, Università della Calabria, Italy
-
Dr. Gorka Ortiz de Zarate, Mondragon Unibertsitatea, Spain
-
Dr. Guenael Germain, Arts et Métiers ParisTech, France
-
Dr. Hans-Peter Schulze, Leukhardt Schaltanlagen Systemtechnik GmbH, Magdeburg,Germany
-
Prof. Hinnerk Hagenah, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany
-
Dr. Holger Aretz, Hydro Aluminium Rolled Products GmbH Bonn Germany
-
Prof. Halilovič Miroslav, University of Ljubljana, Slovenia
-
Dr. Ihab Ragai, Penn State University, USA
-
Prof. James A. Sherwood, University of Massachusetts Lowell, USA
-
Dr. Javad Hazrati, University of Twente, Netherlands
-
Prof. Katia Mocellin, MINES ParisTech, France
-
Prof. Laurentiu Slatineau, Gheorghe Asachi Technical University of Iasi, Romania
-
Dr. Lander Galdos, Mondragon University, Spain
-
Dr. Lionel Leotoing, INSA Rennes, France
-
Prof. Stepan Lomov, Katholieke Universiteit Leuven, Belgium
-
Prof. Loredana Santo, University of Rome Tor Vergata, Italy
-
Prof. Lorenzo Donati, University of Bologna, Italy
-
Prof. Luise Kärger, Karlsruher Institut für Technologie, Germany
-
Prof. Lukasz Madej, AGH University of Krakow, Poland
-
Dr. Malte Stonis, IPH Hannover, Germany
-
Prof. Marc Bernacki, MINES ParisTech, France
-
Dr. Margareta Coteata, Gheorghe Asachi Technical University of Iasi, Romania
-
Dr. Marilena Butuc, University of Aveiro, Portugal
-
Prof. Marion Merklein, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany
-
Prof. Massimo Durante, University of Naples Federico II, Naples, Italy
-
Prof. Matteo Strano, Politecnico di Milano, Italy
-
Prof. Mihaela Banu, University of Michigan, USA
-
Prof. Nadine Allanic, Université de Nantes, France
-
Prof. Nooman Ben Khalifa, Leuphana University Lüneburg, Germany
-
Dr. Olivier De Almeida, IMT Mines Albi, Institut Clément Ader, France
-
Prof. Pedro J. Arrazola, Mondragon University, Spain
-
Prof. Peter Groche, Technischen Universität Darmstadt, Germany
-
Prof. Pierpaolo Carlone, University of Salerno, Italy
-
Prof. Remko Akkerman, University of Twente, Netherlands
-
Dr. Roberto Spina, Politecnico di Bari, Italy
-
Prof. Rosa Di Lorenzo, Università degli Studi di Palermo, Italy
-
Prof. Sam Coppieters, KU Leuven, Belgium
-
Dr Sandra Raquel de Sousa Monteiro, University of Coimbra, Portugal
-
Prof. Sandrine Thuillier, Université Bretagne Sud, France
-
Prof. Semih Perdahcioglu, University of Twente, Netherlands
-
Dr. Sumsun Naher, City University of London, UK
-
Prof. Takashi Matsumura, Tokyo Denki University, Japan
-
Prof. Takayuki Hama, Kyoto University, Japan
-
Prof. Torgeir Welo, Norges teknisk-naturvitenskapelige Universitet, Norway
-
Prof. Tudor Balan, Arts et Métiers ParisTech, France
-
Prof. Vincent Sobotka, University of Nantes, France
-
Prof. Wolfram Volk, Technische Universität München, Germany
Organizing committee in France
- Prof. Anna-Carla Araujo, INSA Toulouse and Institut Clément Ader
- Dr. Arthur Cantarel, IUT Tarbes and Institut Clément Ader
- Prof. Fabrice Schmidt, IMT Albi and Institut Clément Ader
- Prof. France Chabert, ENI Tarbes - LMP/INP Toulouse
- Prof. Philippe Olivier, IUT Toulouse and Institut Clément Ader
Publications
The ESAFORM proceedings will be published in an indexed scientific periodical.
All papers will have a DOI number and its full linked references. Authors retain full copyright of their publications and they are free to publish the same or extended paper elsewhere.
Contact
All questions about submissions should be emailed to esaform2024@listes.mines-albi.fr.